RX300 S5
Service Supplement
33
Replacement routines
Replacing the SAS backplane
4.6
Replacing the SAS backplane
I
In the following section the replacing of the SAS backplanes is described.
Three different variants of the PRIMERGY RX300 S5 are delivered
–
6 x 3.5“ hard disk drive (Replacing see
chapter “Replacement
routines” on page 33
)
–
8 x 2.5“ hard disk drive (Replacing see
chapter “Replacement
routines” on page 34
)
–
12 x 2.5“ hard disk drive (Replacing see
chapter “Replacement
routines” on page 38
)
Ê
Open the server as described in the
section “Opening the server” on
page 17
.
Ê
Remove the fan box.
I
You will find a detailed description of the removing of the fan box in
Description see Options Guide PRIMERGY RX300 S5 in the capter
„preparation“.
4.6.1
Removing the SAS backplane (6 x 3.5“)
Ê
Unlock all harddisks.
I
Note where each hard disk is installed. When you reinstall them make
sure they go back where they came from.
Figure 19: Removing the cables from SAS backplane
Ê
Remove the cables from the SAS backplane.
Summary of Contents for PRIMERGY RX300 S5
