Fujitsu Primergy RX600 S2 User Manual Download

Page: 256 / 299

256

Chapter 9 Operation and Maintenance

Remove the ball and rinse it with water.

Flip the mouse over to remove the ball. Afterwards, wash it with water.

Clean the inside of the mouse.

Wipe the inside of the mouse, the roller, and the bottom cover with a damp cloth.

Insert the ball and apply the cover.

After the ball and inside of the mouse are dry, insert the ball and apply the cover.

■

Optional Devices

For cleaning optional devices, refer to "PRIMERGY ServerBooks" supplied with the server, and

"Supplement" supplied with options.

Roller

Summary of Contents for Primergy RX600 S2












































































































































































































































































































Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands

Fujitsu Primergy RX600 S2, User Manual

Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands