240
Chapter 8 Configuring Hardware and Utilities
8.3.2 Main Menu
The [Main] menu is displayed when you start the BIOS Setup Utility.
Settings for time and date and for the drives are configured on the [Main] menu.
table: Items on the Main Menu
Item
Setting
Description
System Date
Present date
Set the system date in [month:day:year] format.
For example, August 20, 2005 is set as “08“, “20“,
“2005”.
System Time
Present time
Set the system time in [hours:minutes:seconds]
format. The hours should be based on 24-hour clock.
For example, 6:30:00 P.M. is set as “18”, “30”, “00”.
If a highly precise system time is necessary, install a
network synchronized time system (NTP, etc.).
Quiet Boot Enable
• Enabled
• Disabled
（
initial
value
）
Set the initial screen. The LOGO screen is displayed
at booting when you select “Enabled“, and the POST
information is displayed when you select “Disabled“.
POST Error Pause
• Enabled
（
initial
value
）
• Disabled
Set whether or not to stop system booting in case of
POST error.
BIOS SETUP UTILITY
Main
Main
Processor Memory Devices Server Security Save, Restore & Exit
Set General System Parameters
Bios VersionSHW40.86B.P.04.02.0012
System Data
System Time
Quiet Boot Enable
POST Error Pause
[MM/DD/YYYY]
[HH/MM/SS]
<Disabled>
<Enabled>
Current BIOS Version
Esc = Exit
= Move Highlight
Summary of Contents for Primergy RX600 S2
