Fujitsu Primergy RX600 S2 User Manual Download

Page: 275 / 299

275

PRIMERGY RX600 S2 User’s Guide

eration

nd
Mainten

ance

9.4 Security

Security features are provided in order to protect the server hardware and software

from theft. Additional security functions, which prevent unauthorized use, provided by

the BIOS Setup Utility are also available to help maintain a highly reliable data

security system.

9.4.1 Hardware Security

Lock the rack door to protect the hardware in the rack from theft or tampering.

To close the rack door, shut the door and return the rack handle, and turn the rack key.

Do not lose the rack key. If the key is lost, contact your maintenance engineer.

For instructions on opening the rack door, refer to "1.4.1 Opening the Rack Door" (

Pg.30).

The above explanation is based on the 40U standard rack. For details on other rack systems, refer to

their respective manuals.

9.4.2 Security against Unauthorized Use

A password can be set to prevent unauthorized use of the server.

Setting a password makes it necessary to enter the password in order to access the server. Without the

password, the server cannot be used.

■

Password Types

There are two types of passwords that define the privileges of server operations.

Key hole

Rack key

Rack handle

Summary of Contents for Primergy RX600 S2












































































































































































































































































































Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands

Fujitsu Primergy RX600 S2, User Manual

Search results

Summary of Contents for Primergy RX600 S2

Reviews:

Related manuals for Primergy RX600 S2

Brands by name

Popular brands