94
U41662-J-Z156-1-76
PCI boards
Hot-plug Components
8.5.2
Removing the Dummy Module
When no PCI board is inserted in a slot, the slot is occupied by a dummy
module, which is a supporting plate attached to a pull-out aid.
Before inserting an additional hot-plug PCI board, the dummy module must be
removed from the desired slot.
Ê
Remove the cover (see
“Opening/Closing the Casing” on page 98
).
Ê
Remove the dummy module in the same way as a PCI module (see
figure 33
on page 91
).