104
Service Supplement
TX100 S2
Replacement routines
I
In order to enable ServerView Operations Manager and ServerView
Installation Manager to identify the system, it is necessary to store the
server’s FRU data on the onboard Chassis ID EPROM using the Chassis
ID PROM Tool (
ChasProm.exe
) after installing the new system board. The
tool is available for download from the following Fujitsu Technology
Solutions support page:
http://partners.ts.fujitsu.com/com/service/intelservers/tools
4.9
Replacing the Trusted Platform Module
(TPM)
V
CAUTION!
Advise the customer that he must provide you with TPM backup copies.
For security reasons, the TPM must be restored/re-saved by the
customer. If the customer DOES NOT have a backup copy available,
inform him that replacing the TPM will cause him to lose all his data.
Ê
Shut down the server and disconnect the AC power cord from the system.
Ê
Remove the side cover as described in section
4.1.1.1 on page 23
.
Ê
Open the HDD cage as described in section
4.1.2.1 on page 25
.
Ê
Remove the system board as described in section
4.8 on page 96
.
Ê
Lay the system board on a soft, antistatic surface with its component side
facing down.
Summary of Contents for PRIMERGY TX100 S2
Page 1: ...Service Supplement English PRIMERGY TX100 S2 Server Service Supplement Edition July 2010 ...
Page 6: ......
Page 14: ......
Page 22: ......