TX100 S2
Service Supplement
95
Replacement routines
Figure 80: Installing the processor heat sink (B)
Ê
Fasten the four captive screws on the heat sink in a crossover pattern (screw
torque: 0.6 Nm) (1-4).
Ê
Reconnect all power cables to the system board (
see the cabling plans in the
appendix of the PRIMERGY TX100 S2 Options Guide)
.
Ê
Reinstall the air duct as described in section
4.1.4.2 on page 37
.
Ê
Close the HDD cage as described in section
4.1.2.2 on page 27
.
Ê
Close the side cover as described in section
4.1.1.2 on page 24
and
reconnect the AC power cord.
Summary of Contents for PRIMERGY TX100 S2
Page 1: ...Service Supplement English PRIMERGY TX100 S2 Server Service Supplement Edition July 2010 ...
Page 6: ......
Page 14: ......
Page 22: ......