70
Operating Manual
TX100 S2 Core Edition
Installation and operation
Ê
Select
Reinstall Windows
from the
Recovery
section in the Maintenance and
Recovery Manager menu.
V
CAUTION!
–
Please note that all data on the primary partition of your hard disk
drive will be lost!
–
Once the installation has been started, the device must not be
switched off unless the DVD tray opens, indicating that the
installation process is complete.
I
The recovery installation will be performed completely unattended.
The server will reboot several times during the process. The VNC
connection will be closed upon the first reboot and cannot be re-
established until the installation is complete.
Ê
Wait until the DVD tray opens, indicating that the installation process is
complete. This will take about 45 minutes.
Ê
Remove the Maintenance & Recovery DVD and close the DVD tray.
Ê
Perform steps 3 through 5 in
section "Initial operation" on page 47
to finalize the operating system installation and starting up your server.