88
Operating Manual
TX100 S2 Core Edition
Troubleshooting and tips
Ê
Unlatch and remove the side cover.
Ê
Loosen the knurled captive screw on the HDD cage and fold open the HDD
cage. The integrated torque controller will safely retain the HDD cage at any
angle.
Ê
Ensure that all data and power cables on the hard disk drives are connected
correctly.
Ê
Ensure that all HDD SATA cables are connected correctly to the system
board.
Ê
Fold down the drive cage.
I
Ensure that no cables are strained or trapped!
Ê
Secure the drive cage with its knurled captive screw.
Ê
Latch the bottom edge of the side cover to the server chassis.
Ê
Close the side cover until it locks in place.
Ê
Reconnect the AC power cord.
Ê
If the problem cannot be resolved, try booting the server from the
Maintenance & Recovery DVD, establish a VNC connection and create
PrimeCollect log files as described in section
.
Ê
Contact the Fujitsu Technology Solutions customer service team and
forward the PrimeCollect log files for further analysis.