TX100 S2 Core Edition
Operating Manual
75
Installation and operation
5.8
Cleaning the server
V
CAUTION!
–
Switch the server off and disconnect the power plugs from the
properly grounded power outlets.
–
Do not clean any interior parts yourself; leave this job to a service
technician.
–
Do not use any cleaning agents that contain abrasives or may
corrode plastic.
–
Ensure that no liquid enters the system. Ensure that the ventilation
areas of the server are clear.
–
Do not use any cleaning sprays (including flammable types). It may
cause a device failure or a fire.
Wipe the server with a dry cloth. If particularly dirty, use a cloth that has been
moistened in a mild domestic detergent and then carefully wrung out.