178
Upgrade and Maintenance Manual
TX1320
M1
Expansion cards and backup units
9.2.2
Removing expansion cards
9.2.2.1
Preliminary steps
Before removing an expansion card, perform the following steps:
Ê
Locate the defective server as described in section
"Locating the defective
server" on page 44
.
Ê
Disable BitLocker functionality as described in section
"Disabling BitLocker
functionality" on page 73
.
Ê
Disable boot watchdog functionality as described in section
"Disabling
SVOM boot watchdog functionality" on page 74
.
Ê
Shut down the server as described in section
"Shutting down the server" on
page 52
.
Ê
Disconnect the AC power cord from the system.
Ê
If applicable, disconnect external cables to the expansion card.
Ê
Remove the server cover as described in section
"Opening the server" on
page 55
.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools:
tool-less
Summary of Contents for PRIMERGY TX1320 M1
