TX150 S5
Service Supplement
21
Replacement routines
Replacing the DVD/DVD-RW drive
Figure 3: Removing the DVD/DVD-RW drive
Ê
Press together the two springs of the EasyClick rails until they are unlocked
(1).
Ê
Pull the drive out of its bay(2).
Ê
Remove the EasyClick rails from the drive by removing the two screws on
each side. Notice the positions of the holes used.
Ê
Screw the two EasyClick rails on both sides of the new drive.
Ê
Push the new drive into the bay until the locking mechanism of the EasyClick
rails engages.
Ê
Reconnect the power and the data cable.
Ê
Close the server and connect all power plugs (for a detailed description see
the Options Guide).
2
1
1