12
Operating Manual
TX150
S5
Features
Introduction
Service and support
PRIMERGY servers are service-friendly and modular, enabling quick and easy
maintenance. The Flash EPROM program supplied with the Fujitsu Siemens
Computers utilities supports a fast BIOS update.
With the iRMC (integrated Remote Management Controller) on the system
board and the optional remote testing and diagnostic system
RemoteView
, the
PRIMERGY TX150 S5 server can also be maintained and serviced remotely.
This enables remote diagnosis for system analysis, remote configuration and
remote restart should the operating system or hardware fail.
RemoteView
RemoteView
is the remote management solution from Fujitsu Siemens
Computers for Intel-based PRIMERGY systems.
RemoteView
and the relevant
hardware components integrated on the system board allow remote monitoring
and maintenance as well as fast restoration of operability in the event of errors.
Remote monitoring and maintenance avoids time-consuming and costly on-site
repairs and reduces service costs. This leads to a reduction in the total cost of
ownership and an excellent return on investment for the remote management
solution.
The administrator can access all system information and information from the
sensors such as fan speeds, voltages etc. via a Web interface (iRMC Web
interface). He can also start the text-based or graphical console bypass
(Advanced Video Redirection, AVR) and obtain information about remote
storage.
RemoteView
helps
●
switch on/off the system remotely
●
monitor systems and analyze the cause of faults
●
prepare error resolution or to have this process initiated independently if
possible
●
identify potential sources of error
●
configure the system
●
adjust system settings and initiate system restarts from a remote location