TX300 S4
Operating manual
23
2
Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê
First of all, it is essential that you familiarize yourself with the safety infor-
mation in chapter
“Important information” on page 25
.
Ê
Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note (see section
“Unpacking the server” on page 40
Ê
Transport the server to the place where you want to install it.
Ê
Make sure that all necessary manuals (see
) are available; print out the PDF files if required.
Ê
There can be additional ordered bulk components delivered with the server.
For mounting refer to the original component documentation.
Ê
Set up the floorstand model (see section
“Installing the floorstand model” on
) or install the rack model in the rack (see section
“Installing/removing the rack model” on page 43
Ê
Wire the server. Follow the instructions in the sections
“Notes on connecting/disconnecting cables”
Ê
Connect the server to the mains (see section
Ê
Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
