42
Operating manual
TX300
S4
Installing the floorstand model
Hardware installation
Ê
Install the server.
V
CAUTION!
–
The device must be protected from direct sunlight.
–
Ensure that there is enough unobstructed area around the server
for operating and servicing the device (see
the floorstand model” on page 22
–
Access to the rear of the server must be assured so that other
devices (e.g. memory subsystems) can be connected.
–
The mains plug must be accessible easily and safely.
–
A clearance of at least 200 mm must be maintained in front of and
behind the system to ensure proper ventilation.
Ê
Wire the server. Please take note of the
section “Connecting devices to the
section “Notes on connecting/disconnecting
Ê
Connect the system to the line voltage (see
