TX300 S4
Operating manual
73
Starting up and operation
Controls and indicators
CSS
CSS/global error indicator (yellow/red)
Does not light up when the system is OK. No service incident or
critical event has occurred.
If the event is still acute after a power failure, the indicator is
activated after the restart.
CSS
Flashes yellow if an error occurred that you can fix yourself with
the CSS concept (see
“Customer Self Service (CSS)” on page 9
For more details on the error, you can consult the ServerView
Local Service Panel or ServerView S2.
Lights up yellow if a prefailure event was detected for a CSS
component. Details of the event can be found in the System Event
Log or using ServerView S2. The indicator does not light in
standby mode.
Global Error
Flashes red when a critical event has occurred. Details of the
event can be found in the BIOS Setup, in the System Event Log or
using ServerView S2. The indicator also flashes in standby mode.
Lights up red if a prefailure event was detected for a non-CSS
component. Users can check for event details in the System Event
Log or via ServerView S2. The indicator also lights up in standby
mode.
ID
ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
The ID indicator can also be activated via ServerView S2 and its
status reported to ServerView.
!
