U41612-J-Z156-2-76
Options Guide
59
RemoteView components Installing the RemoteView Service Board S2 LP
Figure 44: Connectors of the RSB S2 LP
Ê
Plug the supplied IPMB cable into the connector (see (3) in the above figure)
on the RSB S2 LP.
Ê
Check that the IPMB cable is connected to the system board (see (A) in
).
I
The position of the connectors is described in the Technical Manual
for the D1651 system board.
Ê
Close the server, plug in the power plugs, and switch on the server as
described in the
chapter “Completion” on page 69
1
Connector for the adapter cable (connector for the external power
supply and USB and VGA connection)
2
Connector for the optional power supply (not used)
3
IPMB connector
4
LAN connector
1
2
3
4