U41612-J-Z156-2-76
Options Guide
39
Processors
Exchanging the processor
6.2
Exchanging the processor
V
ATTENTION!
You may only use processors of the same type on the system board.
Ê
Open the server as described in
chapter “Preparation” on page 19
f.
Ê
Remove the processor cover (see
Figure 25: Removing the processor heat sink
Ê
Undo the four screws of the heat sink.
Ê
Turn the heat sink carefully back and forth to loosen it. Then lift it out to
remove it.
Ê
Remove the residual thermal paste from the underside of the heat sink.
Ê
Clean the underside of the heat sink using a lint-free cloth.