Chapter 2 How to Load Documents
47
Fig. 1
ATTENTION
z
The above condition applies when the document is set to the center
of the pick roller width.
z
When you use detection by overlapping, scanning thick documents
such as plastic cards will be falsely detected as multifeed.
In that case, disable multifeed detection.
( Unit: mm)
Top
Reference point
Front side
Feed
direction
Bottom
35
Center
HINT
z
Accuracy of multifeed detection may drop with some documents.
Multifeed cannot be detected for the top 30 mm of a document.
z
For the shaded area in Fig. 1, you can also specify a length not to
detect multifeeds in the Software Operation Panel.
For details, refer to
"8.6 Settings Related to Multifeed Detection"
.
