Chapter 3 How to Use the Operator Panel
54
Signals on the indicator
Check
indicator
Power
indicator
Description
Turns off
Flashes
Processing initialization.
Shown when resuming from power saving
mode or until the scanner is ready after the
ADF is closed.
Turns off
Turns on
Ready to start scanning.
Indicates that the initialization was
successfully completed.
This is referred to as "ready" status.
When the scanner is ready, the Check
indicator turns off and the Power indicator
turns on.
The indicators operate in the same way when
the scanner is in power saving mode.
Turns on
Turns on
Indicates that a temporary error occurred
during scanning.
The Check indicator turns on.
For details about errors, refer to
.
The indicators return to the ready status if the
[Scan/Stop] button is pressed.
Flashes
Turns on
or flashes
Indicates that a device error (alarm) occurred
during initialization or scanning.
The Power indicator turns on or flashes and
the Check indicator flashes.
For details about errors, refer to
.
The indicators return to the ready status if the
[Scan/Stop] button is pressed.
If this alarm occurs, turn the power off and
then back on. If the problem persists after
turning the power back on, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.