Chapter 6 Replacing the Consumables
81
The following table shows the consumables used for the
scanner.
Consumables need to be replaced periodically. It is
recommended that you keep a stock of new consumables and
replace them before it reaches the end of the consumable life.
The scanner records the number of sheets scanned after
replacing the consumables (brake roller/pick roller), which
allows you to check the status on each consumable.
For details, refer to
"8.4 Settings Related to Sheet Counters"
.
Note that the suggested replacement cycles are guidelines for
using A4 (80 g/m
2
[20 lb]) wood-free or wood-containing
paper, as these cycles vary depending on the type of
documents scanned and how often the scanner is used and
cleaned.
To purchase the consumables, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner service provider.
6.1 Consumables and Replacement Cycles
Name
Part No.
Suggested replacement
cycle
BRAKE ROLLER
PA03540-
0001
200,000 sheets or one year
PICK ROLLER
PA03540-
0002
200,000 sheets or one year
HINT
Only use the specified consumables.
