background image

Connecting the ScanSnap to a Wireless LAN

54

Connect a Computer to the ScanSnap

You can use the ScanSnap Wireless Setup Tool Wizard to setup the connection between a 
computer and the ScanSnap (

 

page 52

).

To connect a computer to the ScanSnap with a wireless LAN, follow the procedure below.

1.

Disconnect the USB cable connecting the ScanSnap to the computer.

D

The ScanSnap is automatically connected to a computer via wireless LAN and the 

ScanSnap Manager icon changes 

to  

or .

If the icon does not change, go to step 

2.

2.

Right-click the ScanSnap Manager icon (

 or 

), and then select 

[Connect by Wi-Fi] from the menu that appears.

D

The [ScanSnap Manager - Connect by Wi-Fi] dialog box appears.

3.

In the list of the ScanSnap units to be connected, select the ScanSnap 

that you want to connect, and click the [Connect] button.

D

The ScanSnap is connected to a computer via wireless LAN and the ScanSnap 

Manager icon changes to 

 or 

.

ATTENTION

If the ScanSnap Manager icon is 

 or 

, exit ScanSnap Connect Application on the mobile 

device.

HINT

z

If the [Connect automatically to the last connected ScanSnap by Wi-Fi] check box is selected and 
the last connected ScanSnap is available, the computer is connected to the ScanSnap 
automatically.

z

The computer can be connected to only one ScanSnap.

z

Only one computer can be connected to the ScanSnap.

ATTENTION

z

If the [ScanSnap Manager - Enter Destination Password] dialog box appears, enter the password 
to connect.
The default password is the last four digits of the ScanSnap serial number.
The password can be changed with the ScanSnap Wireless Setup Tool. For details, refer to 
ScanSnap Wireless Setup Tool Help.

z

If the intended ScanSnap for connection does not appear in the list of the ScanSnap units to be 
connected, refer to the ScanSnap Help.

Summary of Contents for ScanSnap iX500






































































































































































































































































































































































































































































































Reviews: