Fujitsu ScanSnap S1100 Operator'S Manual Download

Page: 259 / 449

How to Perform a Scan (for Mac OS users)

259

How to Perform a Scan

This section explains how to perform scanning with the ScanSnap.

■

Preparation

Turn on the computer.

The ScanSnap Manager icon

appears in the Dock when Mac OS starts up.

Open the feed guide to turn on the ScanSnap.

The ScanSnap Manager icon in the Dock changes from

There are two ways to perform scanning, either with the Quick Menu or without using the
Quick Menu. For details, refer to the following:

Using the Quick Menu

(

→

page 260

)

Without Using the Quick Menu

(

→

page 265

)

If the ScanSnap Manager icon

is not displayed, select [Applications] and double-

click [ScanSnap]

→

[ScanSnap Manager] from Finder to start up ScanSnap Manager.

If ScanSnap Manager does not start automatically when Mac OS starts up, select
[Accounts]

→

[My Account]

→

[Login Items]

→

[

]

→

[ScanSnap Manager] in the

[System Preferences] window to start up ScanSnap Manager.

There may be a slight delay before the ScanSnap Manager icon changes to

depending

on your computer's performance, operating environment and load such as when there are
many programs running at the same time.

Feed guide

Summary of Contents for ScanSnap S1100


































































































































































































































































































































































































































































Search results

Summary of Contents for ScanSnap S1100

Reviews:

Related manuals for ScanSnap S1100

Brands by name

Popular brands

Fujitsu ScanSnap S1100, Operator'S Manual

Search results

Summary of Contents for ScanSnap S1100

Reviews:

Related manuals for ScanSnap S1100

Brands by name

Popular brands