How to Load Documents
50
How to Load Documents
Load documents in the ScanSnap in the following procedure.
For details about documents that can be loaded, refer to
"Documents for Scanning" (page
1.
If you are loading multiple sheets, check the number of sheets.
The maximum number of sheets in the ScanSnap is as follows:
For A4 or smaller sizes, up to 5 mm of stacked documents (10 sheets with a paper
weight of 80 g/m² [20 lb]).
2.
Fan the documents.
1.
Hold both ends of the documents and fan them a few times.
2.
Rotate the documents by 90 degrees and fan them in the same manner.
3.
Straighten the edges of the documents and slightly displace the top
edges at an angle.
ATTENTION
If you try to scan more than the maximum amount that can be loaded, the following problems may occur:
Files cannot be properly created due to excessive file size.
Paper jams during scanning
ATTENTION
Paper jams or damage to documents may occur if you scan the documents without aligning the
edges first.
Back
Bac
k
At an angle
Feed direction
