Preparation for use and operation
Setting up the PC
8
A26361-K523-Z100-6-7619
Setting up the PC
!
When installing your PC, pay careful attention to the recommendations on video
workstation ergonomics in the "Safety, Warranty and Ergonomics" manual.
Do not expose the PC to extreme environmental conditions (see chapter "Technical data")
and protect it from dust, humidity and heat.
To ensure adequate ventilation, there must be at least 200 mm clearance around the
ventilation area. Do not cover the ventilation areas of the monitor, the PC or the power
adapter.
The PC can be used either horizontally or vertically.
To ensure proper ventilation and stability when using the device in a vertical position, you must use
the base feet contained in the accessories pack.
Changing the SCOVERY orientation to vertical or horizontal:
Ê
Open the casing (see "Opening the casing“).
Ê
Push the front panel out of the casing from the inside.
Ê
Remove the front panel by lifting it upwards.
Ê
Remove the logo carrier from the front panel.
Ê
Remount the logo carrier in the correct orientation.
Use the base feet contained in the accessory pack when it is to be used in a vertical position. The
On/Off switch must be positioned at the top of the device when it is vertically orientated.
We recommend that you place your equipment on a surface with good anti-slip qualities. In view of
the multitude of different finishes and varnishes used on furniture, it is possible that the feet of the
devices will mark the surface they stand on.
Summary of Contents for SCENIC S
Page 1: ...SCOVERY com Operating Manual SCENIC S SCOVERY xS E n g l i s h ...
Page 3: ......
Page 10: ......
Page 34: ......