System expansions
A26361-K523-Z100-6-7619
45
Ê
Install the holder for the SmartCard reader and the compact flash board (see "Installing the
compact flash board").
Ê
Close the casing (see "Closing the casing“).
Installation opening for 2
nd
serial port
An installation opening for the 2
nd
serial port is provided on the back of the casing. As a result, no
board slot is occupied when a second serial port is installed.
Ê
Insert a screwdriver into the opening and break out the pre-stamped installation opening by
moving it backwards and forwards.
i
Refer to the documentation for the interface and to the system board Technical Manual
for information on how to install the 2
nd
serial interface.
Installing and removing drives
There is space for two accessible drives in the casing of your PC: a 5 1/4" half height drive
(Slimline) and a 3 1/2" floppy disk drive.
IDE drives
By default one IDE drive is supported. Ideally hard disks are connected to IDE port 1, and
accessible IDE drives, for example CD-ROMs, to IDE port 2 (see also the system board Technical
Manual).
Summary of Contents for SCENIC S
Page 1: ...SCOVERY com Operating Manual SCENIC S SCOVERY xS E n g l i s h ...
Page 3: ......
Page 10: ......
Page 34: ......