manualshive.com logo in svg

Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation, User Manual

The Operation Manual for Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 is now available for free download from our website. Obtain in-depth knowledge of this powerful product's operation, features, and functionalities to maximize efficiency and streamline cloud resource management. Enhance your experience with the comprehensive manual accessible at 88.208.23.73:8080.

Share
Download
background image

-

It is recommended to back up destination servers before deploying cloning images, as this will simplify the recovery procedure in
case of the deployed cloning image is faulty.
For details on backing up, refer to "

Backup

".

 

 Note

-

Cloning images cannot be deployed to servers that have been set up as spare servers for other managed servers, when not using I/O
virtualization. Cancel any such settings before deploying a cloning image.

-

VLAN settings (on adjacent LAN switch ports) cannot be deployed during server cloning. LAN switch VLAN settings should be set
up before deploying a cloning image.
For details on how to configure VLAN settings on LAN switches, refer to "

5.4.4 Configuring VLANs on LAN Switches

".

-

When deploying a cloning image back to its source server, the source server should be backed up before deployment.
For details on backing up, refer to "

Backup

".

If the deployed cloning image is faulty and causes deployment errors, use the following procedure to collect a new cloning image.

1.

Restore the system image that was backed up before cloning image deployment.

2.

Fix any incorrect settings on the source server

3.

Collect a new cloning image

4.

Delete the faulty cloning image

-

When deploying cloning images to multiple managed servers, if the managed servers belong to different subnets, cloning images
cannot be deployed.

-

When using PRIMEQUEST servers, cloning images cannot be deployed to partitions for which UEFI has been set.
When collecting and deploying cloning images, configure the BIOS settings and boot option settings after changing to Legacy boot.
For details on how to change boot options, refer to "

7.1.10 Changing Boot Options

".

-

When using local disks as system disks, and iSCSI storage as data disks, refer to the advisory notes described in "Table 8.1 Supported
Storage Device Configurations" in "8.1.1 Storage Configuration" in the "Design Guide VE".

 

Deploying a Cloning Image

Use the following procedure to deploy a cloning image to one or more destination servers:

1.

Place the destination server(s) into maintenance mode (only for agent-registered servers).

a.

In the ROR console server resource tree, right-click the desired server (or its physical OS), and select [Maintenance Mode]-
[Set] from the popup menu.

The [Set Maintenance Mode] dialog is displayed.

b.

Click <OK>.

The target server is placed into maintenance mode.

2.

Deploy a cloning image.

-

Deploying a cloning image to a single destination server

a.

In the ROR console server resource tree, right-click the destination server (or its physical OS) and select [Cloning]-
[Deploy] from the popup menu.

The [Deploy a Cloning Image] dialog is displayed.
The available cloning images are displayed.
Only cloning images that have been collected from a server of the same model as the destination server are available for
deployment.

- 127 -

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Novell LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007 Manual preview
LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007
Brand: Novell Pages: 280
F-SECURE MOBILE SECURITY 80 Series User Manual preview
MOBILE SECURITY 80 Series
Brand: F-SECURE Pages: 39
Valgrind Software Quick Start Manual preview
Software
Brand: Valgrind Pages: 319
Epson PowerLite 955W Specification Sheet preview
PowerLite 955W
Brand: Epson Pages: 6
Epson Stylus Color 600Q Specification Sheet preview
Stylus Color 600Q
Brand: Epson Pages: 1
Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Specification Sheet preview
Stylus Pro - Stylus Color Pro Ink Jet Printer
Brand: Epson Pages: 14
Epson Software Film Factory User Manual preview
Software Film Factory
Brand: Epson Pages: 73
Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Reference Manual preview
Stylus Pro - Stylus Color Pro Ink Jet Printer
Brand: Epson Pages: 98
Epson Stylus Color 600Q User Manual preview
Stylus Color 600Q
Brand: Epson Pages: 95
Epson PowerLite 955W User Manual preview
PowerLite 955W
Brand: Epson Pages: 209
Epson PowerLite D6150 User Manual preview
PowerLite D6150
Brand: Epson Pages: 196
Symantec WISE INSTALLATION EXPRESS 7.0 SP2 Getting Started Manual preview
WISE INSTALLATION EXPRESS 7.0 SP2
Brand: Symantec Pages: 50
Samsung UN55C7000WF Quick Setup Manual preview
UN55C7000WF
Brand: Samsung Pages: 2
Samsung UN40C7000WFXZA Troubleshooting Manual preview
UN40C7000WFXZA
Brand: Samsung Pages: 4
Samsung UN46ES8000FXZA Fast Track Troubleshooting preview
UN46ES8000FXZA
Brand: Samsung Pages: 5
Samsung UN40C7000WF (Spanish) Software Manual preview
UN40C7000WF
Brand: Samsung Pages: 7
Samsung UE40C7000WW User Manual preview
UE40C7000WW
Brand: Samsung Pages: 7
Samsung SVM-­S1 Quick Reference Manual preview
SVM-­S1
Brand: Samsung Pages: 8

Brands by name

Popular brands

Load more brands