-
Confirmation from the GUI
Select the L-Server in the orchestration tree, display the [Resource Details] tab, and check the information is displayed in [Controlled
resources] on the [Status] table.
In [Controlled resources], the following text strings are displayed.
-
When [Server] is displayed
A physical L-Server
A server can be operated by a virtual L-Server
-
When [Server,Storage] is displayed
A server or storage can be operated by a virtual L-Server
-
Confirmation from the Command Line
Execute the rcxadm lserver show command and check that the scope of the controlled resources (ControlledResources) is displayed.
For details, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
For the scope of controlled resources, the following text strings are displayed.
-
When "Server" is displayed
A physical L-Server
A server can be operated by a virtual L-Server
-
When "Server,Storage" is displayed
A server or storage can be operated by a virtual L-Server
18.4.2 For Physical Servers
Use the following procedure to use a physical server as a physical L-Server:
1.
In the ROR console orchestration tree, right-click a physical server in the registered server pool, and select [Convert to L-Server]
from the popup menu.
The [Convert to L-Server] dialog is displayed.
2.
Enter the following items:
L-Server Name
Enter a name for the L-Server.
When the physical server name starts with an alphanumeric character (upper or lower case) and consists of 64 or less characters,
including alphanumeric characters (upper or lower case), underscores ("_"), or hyphens ("-"), the physical server name is
displayed as the default L-Server name.
Enter up to 64 characters beginning with an alphanumeric character (upper or lower case), and including alphanumeric characters
(upper or lower case), underscores ("_"), or hyphens ("-").
Destination folder
Select a resource folder or a tenant to store L-Servers.
If omitted, the L-Server is stored in the root folder of the user that executed the operation.
Label (Optional)
Enter a label for the L-Server.
Enter a maximum of 32 characters.
Comment (Optional)
Enter any comments for the L-Server.
Enter a maximum of 256 characters.
- 241 -
