Note
HBA address rename and VIOM cannot be used together within the same chassis.
When using backup and restore or cloning, prioritize the following two boot operations:
1.
Boot from the first admin LAN network interface (NIC1 (Index1))
2.
Boot from the network interface used by the admin LAN (NIC2 (Index2))
5.2 Registering VM Management Software
This section explains how to register VM management software.
Registration of VM management software (such as VMware vCenter Server) enables use of virtual L-Servers that include resource pool
management provided by server virtualization software. Registration of multiple VM management software (VMware vCenter Server) is
possible.
For details on the required VM management software settings, refer to "Appendix C Configuration when Creating Virtual L-Servers" in
the "Setup Guide CE".
Resource Orchestrator manages a server (with storage and networks) with defined logical specifications (number of CPUs, memory
capacity, disk capacity, number of NICs, etc.) as an L-Server. In order to manage a virtual machine as an L-Server, VM management
software must be registered in Resource Orchestrator.
Use the following procedure to register VM management software:
1.
From the ROR console menu, select [Settings]-[Register], and then select the type of the VM management software to use.
The [Register Management Software(
name
)] dialog is displayed.
In
name
, the type of the VM management software is displayed.
2.
To use this feature, the following settings must first be defined:
Management software name
Enter the name of the target VM management software.
Enter a character string beginning with an alphabetical character and containing up to 15 alphanumeric characters and hyphens
("-").
Location
Select the location where the VM management software to register is operating.
-
If VM management software is installed on the admin server
Select [Admin Server].
-
In other cases
Select [Other Server].
Selecting this option activates the IP address field. Enter the IP address of the server on which VM management software
is installed.
By default, [Admin Server] is selected.
IP address
Enter the IP address of VM management software. When specifying [Admin Server] for the location, entry is not possible, as
the IP address of admin server remains displayed.
Enter the IP address using periods ".".
Note
When receiving SNMP traps from VM management software (VMware vCenter Server), the configured IP address and the
SNMP trap source IP address of the VM management software (VMware vCenter Server) should be the same. The SNMP trap
- 23 -
