The following settings can be changed.
-
Location
-
IP address
-
User ID
-
Password
Here the method for changing settings registered with Resource Orchestrator is explained.
Complete reconfiguration within the VM management software admin console before performing this procedure.
Use the following procedure to change VM management software settings:
1.
In the ROR console management software tree, right-click the target management software, and select [Modify]-[Registration
Settings] from the popup menu.
The [Modify Management Software(
name
) Settings] dialog is displayed.
The name of the selected VM management software is displayed in
name
.
2.
Enter the following items:
Location
Select the location of the VM management software registration to change.
-
If VM management software is installed on the admin server
Select [Admin Server].
-
In other cases
Select [Other Server].
IP address
If [Other Server] was selected, enter the IP address of the server on which VM management software is installed.
User ID
Enter the user ID to use to control VM management software.
Password
Enter the password for VM management software.
3.
Click <OK>.
VM management software settings are changed.
7.8 Changing Power Monitoring Environment Settings
This section explains how to change power monitoring environment settings.
Power environment settings include environmental data settings, collection cancel settings, and power monitoring device settings.
7.8.1 Changing Environmental Data Settings
Use the following procedure to change environmental data settings:
1.
Select [Tools]-[Options] from the ROR console menu.
The [Options] dialog is displayed.
2.
Click the [Environmental Data] category title, and input the following items in the displayed area.
Data to collect
Select the [Power] checkbox to start collecting power consumption data.
- 84 -
