12 Importing and exporting server profiles
l
FCBootConfiguration
BootPriority
Specifies the boot order. Possible values are 1 to 4. However, each
value can only appear once within a profile.
PXEBootConfiguration
Specifies that the port is a PXE boot device. This element is empty. You
can only specify this element for LAN ports.
ISCSIBootConfiguration
Specifies that the port is an iSCSI boot device. You can only specify this
element for LAN ports. The elements contained in this element are
described below.
FCBootConfiguration
Specifies that the port is a SAN boot device. You can only specify this
element for FC ports. The elements contained in this element are
described below.
12.3.7 The ISCSIBootConfiguration element
The
ISCSIBootConfiguration
element contains the following elements:
ISCSIInitiator
Specifies the values of the iSCSI initiator. This element contains the fol-
lowing elements:
DHCPUsage
Yes
In the case of an iSCSI boot, the system tries to obtain the
client IP address, subnet mask, and gateway IP address from a
DHCP server. Only the initiator name must be specified here.
324
ServerView Virtual-IO Manager
Summary of Contents for ServerView Virtual-IO Manager V3.1
