AMILO Pro
A26391-K149-Z100-1-7619, Edition 2
19
The notebook does not react
1
If the notebook does not react and cannot be switched off with the suspend/resume button, you can
reset it with the Reset switch.
►
Press a pen or a piece of wire (e.g. a paperclip) firmly into the opening (1).
►
Switch the notebook on.
The LCD screen of the notebook remains blank
If your LCD screen remains blank this may be due to the following:
LCD screen is switched off
►
Press a key or enter the password
External monitor or television set connected
►
In
BIOS-Setup
in the
Advanced - Video Features
menu set the
Display Settings
setting to
Internal
Flat Panel
.
The notebook has been configured to drive the external monitor
►
Press the key combination
Fn
+
F10
until you find the display option you require.
The LCD screen is difficult to read
If the LCD screen display is hard to read, it can be due to the following:
Reflection
►
Turn the notebook or alter the tilt of the LCD screen.
Brightness control is set to dark
►
Set the brightness control of the LCD screen to bright.
Summary of Contents for Siemens AMILO Pro answers 2
Page 1: ...Getting Started AMILO Pro English answers2 ...
Page 3: ......
Page 5: ...AMILO Pro August 2004 edition ...
Page 8: ......