Precautions
●
Notes on the documents to be scanned
Depending on the documents to be scanned, take note of the following.
●
When scanning wood containing papers, the life of the brake roller and pick roller may end sooner compared
to scanning wood-free papers.
●
The brake roller and pick roller may be damaged when a photo/sticky note on a document comes into contact
with these parts during scanning.
●
The surface of the document may be damaged when gloss papers such as photographs are scanned.
●
When scanning semi-transparent documents, set [Brightness] higher in the scanner driver to avoid bleed-
through.
●
When you scan documents written in lead pencil, there may be black traces left on the document, which may
cause feeding errors.
Clean the rollers frequently.
For details about cleaning, refer to
●
If documents are not fed, or documents are fed overlapped or jammed frequently, refer to
.
●
All documents must be flat on the leading edge.
Make sure that curls on the leading edge of the documents are kept within the following range.
●
Notes on plastic cards
When you scan plastic cards, take note of the following.
●
Make sure you use a card that contains the following specifications, and check if the card can be fed before
scanning it.
-
Type: Compliant with the ISO7810 ID-1 type
-
Size: 85.6 × 53.98 mm (3.37 × 2.13 in.)
-
Thickness: 0.76 mm (0.03 in.) or less (Embossed cards allowed)
-
Material: PVC (polyvinyl chloride) or PVCA (polyvinyl chloride acetate)
How to Load Documents
52
Summary of Contents for SP-1130Ne
