8
SPARC Enterprise M8000/M9000 Servers Product Notes for XCP Version 1092 • April 2010
●
Change the clock source that the NTP server being set in XSCF refers to
Use the
showntp -l
command and check the clock source of the NTP server which
is set in XSCF. An NTP server which indicates the refid of
LOCAL(0)
in the output is
referring to the local clock which has the address of "127.127.1.0," and you should
change it to refer to another clock source.
When you change the clock source of an NTP server, make sure in advance that it
has no impact on other NTP clients.
●
Change the address of the local clock of the NTP server
Of the NTP server which XSCF refers to, change the address of the local clock to
"127.127.1.1," "127.127.1.2," or "127.127.1.3." Change
/etc/inet/ntp.conf
of
Solaris OS. To enable the change, restart of the NTP daemon is required.
When you change the address of the local clock of an NTP server, make sure in
advance that it has no impact on other NTP clients.
●
Change the stratum value of the NTP server
Of the NTP server which XSCF refers to, change the stratum value to "1." An NTP
server which has the stratum value of "1" becomes the most significant clock source
and has no refid. Therefore, there is no chance that it will have the same address as
the XSCF's own local clock.
When you change the stratum value of an NTP server, make sure in advance that it
has no impact on other NTP clients.
●
Change the address of the XSCF's own local clock
By using the
setntp -m localaddr=
value
command, change the address of the
XSCF's own local clock. In
value
, specify the least significant byte of the clock
address of the local clock 127.127.1.
x
for
value
. A numeric from 0 to 3 can be
specified. By specifying either from 1 to 3, the address of an NTP server which is
referring to the local clock does not correspond to the address of the XSCF internal
local clock anymore, and a server which is referring to the local clock can also be set
as the NTP server of XSCF.
Notes on XSCF Web
■
Under the Windows 7
*1
and Internet Explorer 8.0 environment, XSCF Web does
not support the use through the built-in Administrator account.
■
On Internet Explorer 8.0, when you move the on-screen horizontal frame up or
down to change the frame height and use the [Monitor Msg Show/Hide] button,
the screen background color may turn black. In this case, click Refresh on the
View menu or press F5 key to refresh the display, to go back to the screen right
after the login.
*1. Windows is either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
Summary of Contents for SPARC Enterprise M8000
Page 4: ......
Page 8: ...viii SPARC Enterprise M8000 M9000 Servers Product Notes for XCP Version 1092 April 2010 ...
Page 12: ...xii SPARC Enterprise M8000 M9000 Servers Product Notes for XCP Version 1092 April 2010 ...
Page 88: ...76 SPARC Enterprise M8000 M9000 Servers Product Notes for XCP Version 1092 April 2010 ...
