Safety Agency Compliance Statements
9
Safety Agency Compliance Statements
English
Safety Agency Compliance Statements
Read this section before beginning any procedure. The
following text provides safety precautions to follow
when installing a Fujitsu product.
Safety Precautions
For your protection, observe the following safety
precautions when setting up your equipment:
・
Follow all cautions and instructions marked on the
equipment.
・
Ensure that the voltage and frequency of your power
source match the voltage and frequency inscribed on
the equipment’s electrical rating label.
・
Never push objects of any kind through openings in
the equipment. Dangerous voltages may be present.
Conductive foreign objects could produce a short
circuit that could cause fire, electric shock, or
damage to your equipment.
Symbols
The following symbols may appear in this book:
Caution –
There is a risk of personal injury
and equipment damage. Follow the
instructions.
Caution –
Hot surface. Avoid contact.
Surfaces are hot and may cause personal
injury if touched.
Caution –
Hazardous voltages are present.
To reduce the risk of electric shock and
danger to personal health, follow the
instructions.
Depending on the type of power switch your device
has, one of the following symbols may be used:
On –
Applies AC power to the system.
Off –
Removes AC power from the system.
Standby –
The On/Standby switch is in the
standby position.
Modifications to Equipment
Do not make mechanical or electrical modifications to
the equipment. Fujitsu is not responsible for regulatory
compliance of a modified Fujitsu product.
Placement of a Fujitsu Product
Caution –
Do not block or cover the
openings of your Fujitsu product. Never
place a Fujitsu product near a radiator or
heat register. Failure to follow these
guidelines can cause overheating and affect
the reliability of your Fujitsu product.
