Fujitsu ST5111 - Stylistic Tablet PC User Manual Download

Page: 34 / 96

S t y l i s t i c S T 5 1 0 0 S e r i e s T a b l e t P C U s e r ’ s G u i d e – S e c t i o n T w o

When you use your Tablet PC, you can change the
current system state in a number of ways, depending on
the system’s current state. To determine the current
system state, observe the Power icon in the Status
display. Table 2-1 on page 25 gives the different system
states represented by the Power icon and describes how
you can change the system state from the current state.

POWERING UP THE TABLET PC

Follow the procedure below to start your Tablet PC.
Before you begin, confirm that the system is in the Off
state. To do so, observe the Status display. If the Power
icon is not visible in the Status display, the system is in
Off state or in Hibernate mode and it is safe to perform
this procedure. If the Power icon is visible (either
blinking or on continuously), do not perform this
procedure. See “System States” earlier in this chapter for
details on modes represented by the Power icon.

1. Ensure that the battery in your Tablet PC is

sufficiently charged, or connect an external power
source such as the AC adapter or auto adapter to
your Tablet PC.

2. Press the Power On/Suspend/Resume button to start

the system.

After performing initialization, the system starts the
operating system installed on the hard disk drive. Once
the operating system is running, you can use the system.

BOOTING THE SYSTEM THE FIRST TIME

We strongly recommend that you not attach any external
devices until you have gone through the initial power on
sequence.

When you turn on your tablet for the first time, it will
display a Fujitsu logo on the screen. If you do nothing
the system will load the operating system, and then the
Windows Welcome will begin.

Depending upon your operating system (Windows Vista
or XP edition), there is a different procedure for stating
your system for the first time, as outlined below.

Starting Windows Vista the first time

In order to ensure that you receive the most benefits
from the Windows Vista operating system, it should be
registered the first time you use it.

1. First of all, you will need to read and accept the End

User License Agreements (EULAs).

2. You will be prompted to enter your User Name and

Password and you will be given a chance to select an
icon for your account.

3. The next screen asks for a Computer Name and

allows you to choose a desktop background.

4. You will next see a "Help protect Windows automat-

ically" screen in which the default choice is "Use
recommended settings”. The other two choices are
"Install important updates only" and "Ask me later".
Select from the three choices.

5. On the next screen set your time and date settings.

6. You will next see the "Select your computer's current

location" screen. Make your selection from Home,
Work (Default), and Public location.

7. The "Thank you" screen follows and an offer for free

Norton Internet Security is extended. Following are
several screens while Windows checks the system
performance.

8. Windows will then boot up for the first time. After

the first boot, press [Execute] to install the Primary
Settings. This will take several minutes.

9. After the Primary Settings are installed, reboot the

system again.

Registering Windows Vista with Microsoft

1. After Windows has booted up for the first time, the

Control Panel Welcome Center will appear. If the
Register Windows Online icon is not seen in the
window, click on “Show all xx items” (where “xx” is
the number of topics in the Welcome Center).

2. Click on Register Windows Online and follow the

instructions that appear to register your copy of
Windows.

The first time you initialize your Windows
Vista system, the screen will be blank for
approximately two minutes.

This is

normal. After initialization, a “Set Up
Windows” dialog box will appear.

Important:

During the setup procedure, do

not disconnect the power supply, press any
buttons, or use any peripheral devices such
as a mouse, keyboard, or remote control.

• If you reject the terms of the license

agreements you will be asked to
review the license agreements for
information on returning Windows or
to shut down your Tablet PC.

•

You cannot use your tablet until you
have accepted the License
Agreements. If you stop the process
your tablet will return to the beginning
of the Windows Welcome Process,
even if you shut your tablet down and
start it up again

Osian_UG.book Page 26 Friday, June 8, 2007 12:45 PM