123
- Présentation du capteur d’empreintes digitales
Paramètres de système
Vous trouverez l’interface
Options de démarrage
dans l’onglet « Paramètres de système ». Les options de cette
interface vous permettent de spécifier la manière dont votre ouverture de session OmniPass est associée à votre
ouverture de session Windows.
La première option,
Se connecter automatiquement à OmniPass en tant qu’utilisateur actuel
, est explicite. Lors
de l’ouverture d’une session Windows, vous êtes connecté à OmniPass à l’aide de vos références de connexion
Windows. Si l’utilisateur ouvrant une session Windows n’a jamais été enregistré dans OmniPass, personne n’est
connecté à OmniPass au moment de la connexion. Ce paramètre convient à une configuration de bureau ou à toute
configuration nécessitant la saisie d’un nom d’utilisateur et d’un mot de passe pour utiliser l’ordinateur. Il s’agit du
paramètre par défaut.
Avec la deuxième option,
Se connecter manuellement à OmniPass au démarrage
, OmniPass vous invite à vous
connecter une fois que vous avez ouvert une session Windows.
Si vous choisissez la troisième option,
Ne pas se connecter à OmniPass au démarrage
, OmniPass n’invite pas
l’utilisateur à se connecter.
Vous pouvez vous connecter manuellement à OmniPass en cliquant avec le bouton droit de la souris sur l’icône
d’OmniPass dans la zone de notification et sur
Connecter l’utilisateur
dans le menu généré.
Dépannage
Vous ne pouvez pas utiliser OmniPass pour créer des utilisateurs Windows. Vous devez d’abord créer l’utilisateur
Windows, ce qui nécessite des droits d’administrateur. Une fois l’utilisateur Windows créé, vous pouvez l’ajouter dans
OmniPass avec le même nom d’utilisateur et le même mot de passe.
Impossible d’ajouter des utilisateurs Windows dans OmniPass
Si vous rencontrez des difficultés pour ajouter un utilisateur Windows dans OmniPass, vous devrez peut-être modifier
vos paramètres de sécurité locale. Pour ce faire, allez à
Démarrer, Panneau de configuration
,
Outils d’administration
et
Paramètres de sécurité locale
. Ouvrez
Stratégies locales
et
Options de sécurité
, puis double-cliquez sur
Accès
réseau : Modèle de partage et de sécurité pour les comptes locaux
. La configuration correcte doit être
Classique –
Les utilisateurs locaux s’authentifient eux-mêmes
.