80
- Restoring Your System Image and Software (Windows 8)
To recover from D: drive or external storage device:
1
Click [User System Backups]
2
The progress bar screen is followed by EULA screen. Click [Agree] to accept the EULA.
3
On “Select an image to restore” screen select the image to restore from the list of images and click [Next].
4
Click [Start] on the “Confirm before restoration” screen to begin the restoration process.
5
Once restoration finishes, click [Close] in the “Finished restoration” screen; the computer will restart to Windows.
To restore from the Factory Image (hidden partition):
1
Click [Restore C: drive].
2
The progress bar screen is followed by “Restore Factory Image (only C: drive) screen confirming that the Factory
Image will be restored to the C: drive and D: drive data will remain. Click [Next].
3
Read the instruction screen and select [Agree], then [Next].
4
Click [OK] to the warning message to restore factory image to the C: drive.
5
When the progress bar screen, wait for the process to complete.
6
Click [Finish] when the process completes; the computer will restart to Windows.
To restore full hard drive
:
Follow the steps in section “
Recovering your Factory Image using Recovery and Utility (for new hard drive or
non-bootable hard drive)
”
Utility tool:
The Utility tool contains two options: Hard Disk Data Delete and Partition Creation.
•
The
Hard Disk Data Delete
utility is used to delete all data on the hard disk and prevent the data from being
reused.
NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want
to erase your entire hard disk, including all partitions
.
