Fujitsu SV600 Basic Operation Manual Download

Page: 452 / 500

Cleaning the Background Pad (SV600)

As you keep using the Background Pad, dirt and dust will accumulate on the surface.
Clean the Background Pad in the following procedure.

Cleaning

Clean the Background Pad with a dry or damp cloth.

ATTENTION

Do not use any detergent.

Keep the Background Pad away from fire or high-temperature objects.

Do not wrinkle or fold the Background Pad.

It is recommended that you store the Background Pad in the tube and bag in which the Background
Pad was packaged.

Keep the Background Pad out of direct sunlight when storing it.

Cleaning the Background Pad (SV600)

452

Summary of Contents for SV600





















































































































































































































































































































































































































































































































Search results

Summary of Contents for SV600

Reviews:

Related manuals for SV600

Brands by name

Popular brands

Fujitsu SV600, Basic Operation Manual

Search results

Summary of Contents for SV600

Reviews:

Related manuals for SV600

Brands by name

Popular brands