background image

Scanning Documents of Different Widths or Lengths in One Batch
(S1300i)

Documents of different widths or lengths can be scanned in one batch.
For details about documents that can be scanned, refer to 

"Documents to Scan (S1300i)" (page

288)

.

1.

Open the ADF paper chute (cover) of the ScanSnap.

ADF Paper Chute (Cover)

a

The [Scan] button flashes in blue. The button returns to being lit normally when document
scanning is enabled.
In addition, the ScanSnap Manager icon in the notification area located at the far right of

the taskbar changes from 

 to 

.

2.

Pull out the extension.

Extension

3.

Right-click the ScanSnap Manager icon 

 in the notification area located

at the far right of the taskbar, and select the [Scan Button Settings] from the

"Right-Click Menu" (page 86)

.

a

The ScanSnap setup window appears.

Scanning Documents with S1300i

299

Summary of Contents for SV600





















































































































































































































































































































































































































































































































Reviews: