![background image](http://html.mh-extra.com/html/fujitsu/ubiquitousware/ubiquitousware_user-manual_119639017.webp)
Using the device
Fujitsu
13
Notification LED
SNyomtifibcoalstionLEDs
The notification LED provides information about the status of the power supply
,
battery and
other
notifications in the chart below
.
Status
Action
Displays
Description
Flashes green
twice
Powered on
Power on
Hold the power
button down (at
least 3-5
seconds)
Flashes green
twice, then
flashes red
once
If the battery is too low, the device will
automatically turn off. Be sure to charge it
before use
Power off
Hold the power
button down (5 to
9 seconds)
Flashes green 3
times
Powered off
Flashes green 3
times
There is enough battery power left.
Remaining battery
check
Press the power
button for 1
second
Flashes red 3
times
The battery is very low (less than 20%). Be
sure to charge it before use
Charging
Stays lit red
Stays lit while charging, then the LED turns
off when charging is complete.
Charging error
-
Flashes red
There is a charging error or hardware failure
Flashes green
for a maximum
of 30 seconds
Waiting for pairing. Once pairing is complete
the LED will stay on for 3 seconds
Pairing
Hold the power
button down (3 to
4 seconds)
Green for 3
seconds
Pairing successful
Notification LED
Summary of Contents for UBIQUITOUSWARE
Page 3: ......