2 CONTROL
2-1
On and Off
(1)
Press the [On/Off] button.
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
Menu
Status
Fan
Fri 10:00AM
On/Off button
Power indicator lamp
The Power indicator lamp remains lit while the indoor
unit is operating.
NOTE
The On/OFF button cannot be operated at screens other
than the monitor mode screen.
2-2
Operation Settings
2-2-1
Set the Operation Mode
(1) Touch the [Mode] on the monitor mode screen.
(2) “Mode” screen is displayed. Select the operation mode.
(1)
(2)
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
Menu
Status
Fan
Fri 10:00AM
Mode
Cancel
Cool
Dry
Heat
Fan
OK
Auto
Depending on the model of
the indoor unit, [Custom Auto]
is displayed instead of [Auto].
26.
26.0
°C
Custom
Auto
Set Te
Mode
Dry
Heat
Fan
OK
Custom
Auto
NOTES
• Only selectable modes are displayed. The select-
able modes may be different depending on the
system configuration and operation status. Refer
to [4.OPERATION TIPS]→[4-1 Selectable modes].
• When the “Fan” is se-
lected, the temperature
cannot be set.
Fan
Auto
Set Temp.
Mode
Menu
Status
Fan
Fri 10:00AM
• [Auto] or [Custom Auto] mode can be used in the
R.C. Group to which Master Indoor Unit is set. It is
not displayed at other R.C. Group.
• When the operation mode is switched in a heat
recovery system, operation preparations may take
some time, but this is not a malfunction.
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
2-2-2
Set the Temperature
(1) Touch the [Set Temp.] on the monitor mode screen.
(2) “Set Temp.” screen is displayed. Adjust the room tem-
perature with the [ ] or [ ].
(1)
(2)
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
Menu
Status
Fan
Fri 10:00AM
26.0
26.0
°C
°C
Set Temp.
Cancel
OK
When the operation mode is
set to [Custom Auto], set the
cooling and heating tempera-
ture.
20.0
28.0
°C
°C
Set Temp.
Cancel
OK
Heat
Cool
NOTES
•
The settable temperature range is different depend
-
ing on the operation mode. Refer to [4 OPERA-
TION TIPS]→[4-3 Selectable Temperature Range].
• When the “Set Temp. Range Setting” is set, the se-
lectable temperature conforms to the setting. Refer
to [3 SETTING] → [3-6 Special Setting] → [3-6-3
Set Temp. Range Setting].
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
2-2-3
Set the Fan Speed
(1) Touch the [Fan] on the monitor mode screen.
(2) “Fan” screen is displayed. Select the fan speed with the
[ ] or [ ].
(1)
(2)
26.0
26.0
°C
°C
Cool
Auto
Set Temp.
Mode
Menu
Status
Fan
Fri 10:00AM
Fan
Cancel
OK
Auto
(3) When the [OK] is touched, the display returns to the
monitor mode screen.
En-7
Summary of Contents for UTY-RNRGZ5
Page 27: ......
