En-4
1-3. About “Monitor” screen
“Monitor” screen shows several statuses such as the operat
-
ing status of the air conditioner, function setting, or other cur-
rent operating conditions.
Mode
Menu
Cool
Monitor
Room 28˚
C
Set temp.
Fan
High
°C
26
Mo 10:00
Icon check:
(1)
(2)
(5)
(3)
(4)
(1)
Screen status and current conditions
Shows the current screen name, room temperature, day
of the week, and clock.
NOTES:
The clock can be changed to 24-hour clock, AM/PM
•
(12-hour: 12:00–11:59 or 0:00–11:59) clock. (Refer
to “5-2-4. Change display format setting” on
page 18.)
Room temperature indication is available only if the
•
“Room temp. display” function is enabled. (Refer to
“5-6. Room temp. display setting” on page 21.)
(2)
Icon display
Shows the function that is currently working or set.
NOTE:
In this section, all the possible icons are dis-
played for description.
Icon
Function name
See
page
-
Economy
9
Set temp. (
temperature) auto
return
9
Set temp. (
temperature) range
limitation
10
On timer
11
Off timer
12
Auto-off timer
15
Weekly timer
13
-
R.C. (Remote Controller) sensor
control
21
-
Automatic defrosting, oil
recovery, or mode mismatch
24
Filter cleaning notification
20
-
R.C. (Remote Controller)
prohibition
-
White icon on a black background:
Indicates that the function is valid and performing the
function or standby state.
Black icon on a white background:
Indicates that the controller is in non-operating state be-
cause R.C. prohibition on the primary unit is working, or
timer has been set, though the function is valid.
About “Icon check” function:
In “Monitor” screen, you can check the name of the icon
that indicates function currently set.
NOTE:
This function is only available when at least 1 icon
is displayed on the icon display.
Message balloon with the function name appears when
•
you press the [Enter button] and select the icon by using
the [Cursor button].
Item that has a timer function, remaining time until the
•
timer expires is also displayed.
Cool
Monitor
Mo 10:00
High
°C
26
Menu
Off timer: Remaining 1.0 hour
End:
If multiple timers have been set, up/down arrows
•
are
displayed in the message balloon. To check the target
timer function, press the [Cursor button (Up/Down)].
Off timer: Remaining 1.0 hour
With pressing the [Cursor button (Left/Right)], you can
•
check the other icon functions when several icons are
displayed on the “Monitor” screen.
When you press the [Enter button] again, the message
•
balloon is closed.
If there is no additional button operation for 3 seconds,
•
the icon check function is finished.
(3)
Operating condition display
Shows the operating mode, set temperature, and fan
speed that are currently working or set.
Mode display: Operating mode is displayed.
•
Set temp. display: Set temperature is displayed.
•
Fan display: Fan speed is displayed.
•
(4)
Operation guidance display
Shows the current operable items and the button to be
pressed.
(5)
Screen switch guidance display
Any combination of [Menu button] mark (
) with name
of switchable screen by pressing the [Menu button] or
[Screen switch button (Left/Right)] mark (
or
)
with name of switchable screen by pressing the [Screen
switch button (Left/Right)] is displayed.
9380221043_OM.indb 4
8/22/2012 3:54:56 PM
