En-5
2. BASIC OPERATIONS
2-1. Starting the operation
PREPARATION:
Check whether the current time is displayed correctly on the
screen. When changing the time or switching the setting for
summer time (daylight saving time), follow the instructions in
“5-2. Date/Time setting”.
Menu
Monitor
Mo 10:00
O f f
2-1-1. On/Off setting
Press the [On/Off button].
The power indicator (green) lights, and the air
conditioner starts the operation.
When you press the button again, the opera-
tion is stopped, and the power indicator is
turned off.
2-1-2. Operation mode setting
In “Monitor” screen, select [Mode], and switch to the desired
operation mode with the [Cursor button (Up/Down)].
Mode
Menu
Auto
Monitor
Set temp.
Fan
High
°C
26
Mo 10:00
Operation mode marks
Auto
Cool
Dry
Fan
Heat
Note
Only the adjustable operation mode is displayed.
If there is another operation setting to be changed, you can
continue the configuration. Move to desired item by using
[Cursor button (Left/Right)].
2-1-3. Set temperature adjustment
In “Monitor” screen, select [Set temp.] with the [Cursor button
(Left/Right)], and adjust the room temperature with the [Cursor
button (Up/Down)].
Mode
Menu
Auto
Monitor
Set temp.
Fan
High
°C
26
Mo 10:00
Notes
• Possible temperature setting ranges in the operation
mode are as follows:
Cool, Dry, Auto ................
18 to 30 °C (64 to 88 °F)
Heat .................................
16 to 30 °C (60 to 88 °F)
• When operation mode is set to [Fan], the set
temperature cannot be adjusted. ([Set temp.] cannot
be selected.)
• If the temperature is being out of the range configured
in [Set temp. range] setting, message indicating
that the temperature is restricted is displayed on the
screen.
Menu
Restricted by the set temperature range restriction
11
2-1-4. Fan speed setting
In “Monitor” screen, select [Fan] with the [Cursor button
(Left/Right)], and adjust the fan speed with the [Cursor button
(Up/Down)].
Mode
Menu
Cool
Monitor
Set temp.
Fan
High
°C
26
Mo 10:00
Fan speed marks
Auto
High
Medium
Low
Quiet
Note
When the operation mode is set to [Dry], Fan speed
switches to [Auto]. (Fan speed cannot be selected.)
9380221043_OM.indb 5
8/22/2012 3:54:57 PM
