1 8 Parametering the setting
1 8 1 General
• Only the parameters accessible to level :
End user.
Are described in this section.
• The parameters accessible at levels :
Commissioning level.
Engineer level.
… are described in this section reserved for
these professional specialists.
Do not make any
modifications to these parameters without advice
from these professional specialists
1 8 2 Setting parameters
With the screen on basic display.
-Press
OK
.
Once in
"End user" level
-Scroll the menu list.
-Choose the desired menu.
-Scroll the function lines.
-Choose the desired line.
-Adjust the parameter.
-Check the setting by pressing
OK
-To return the menu, press
ESC
If no setting is made for 8 minutes, the screen returns
automatically to the basic display.
Basic
display
OK
Brief
press
End user
OK
OK
OK
Time of day and date
Hours / minutes
1
Hour
1...24 h
Operator section
Day / Month
2
Minutes
0...60 min
Time prog heating circuit 1
Year
3
...
Line
Function
Setting range or display
Setting
increment
Basic setting
Date and time
1
Hours / Minutes
00:00... 23:59
1
2
Day / Month
01.01... 31.12
1
3
Year
1900... 2099
1
Operator section
20
Language
English, Français, Italiano,
Nederlands
English
Heating time programme, circuit 1
500
Pre-selection (Day / Week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday…
Mon-Sun
501
1
st
phase On (start)
00:00... --:--
10 min
6:00
502
1
st
phase Off (end)
00:00... --:--
10 min
22:00
503
2
nd
phase On (start)
00:00... --:--
10 min
--:--
504
2
nd
phase Off (end)
00:00... --:--
10 min
--:--
505
3
rd
phase On (start)
00:00... --:--
10 min
--:--
506
3
rd
phase Off (end)
00:00... --:--
10 min
--:--
516
Default values, Circuit 1
No, Yes
No
Yes + OK : The default values memorised in the regulator replace and cancel the customised heating programmes.
Your customised settings are therefore lost.
Operation manual "1408 - EN"
- 9 -
Control Box
