Operation
Selecting input signal (VGA / MHL/HDMI1 / HDMI2)
►
Press the
INPUT
button to call up the
Input select
settings window.
►
Press the
/
or the
INPUT
/
button to select the desired monitor
connection (VGA, MHL/HDMI1 or HDMI2).
►
Press the
MENU
/
button to con
fi
rm your selection or the
AUTO
/
button to cancel the process.
This setting window can also be called up when the OSD menu is locked.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
►
Press and hold the
ECO
and
INPUT
buttons at the same time for a few seconds.
The message
OSD locked / unlocked
is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
►
Press the
ECO
button to switch the ECO operating mode on or off.
The message
ECO Mode on
or
ECO Mode off
appears.
If you press the ECO button, the following settings are changed:
•
the brightness will be adjusted to an energy-saving level
•
the power button LED will illuminate in green
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Fujitsu
23