Technical speci
fi
cation
Power supply
Switches automatically
100 V – 240 V~,
50 Hz/60 Hz
Normal operation
29 W
ECO operating mode
22.7 W
Power consumption (typical)
(excluding audio, USB)
Energy-saving mode
(0 W operating mode)
0.4 W
Sound output (internal speakers)
3 W left; 3 W right
Environmental conditions
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity
15 °C .... 35 °C
20 % .... 85 %
Limit range of operation
Humidity
5 °C .... 35 °C
20 % .... 85 %
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.
Preset operating modes
The picture position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the display adapter used, it may be
necessary to adjust the display position and size. In this case, you can change and
save the settings (see chapter
"Changing the monitor settings", Page 22
).
For ergonomic reasons, a screen resolution of 1920 x 1080 pixels is recommended.
Because of the technology used (active matrix), an LCD monitor provides a
totally
fl
icker-free picture, even with a refresh rate of 60 Hz.
Fujitsu
35