XG Series User's Guide
Chapter 6 Managing the Device
Verifying the Device Operations
571
XG2600
1)
Current time
Present date and time.
2)
Startup time
Date and time when the system started up.
3)
restart_cause
Cause for the system startup.
The following system startup causes are displayed:
power on
: The power has been turned on.
reset
: The reset command has been issued.
reset switch : The [RESET] switch has been pressed.
system down : System-down has occurred.
4)
machine_state
State of the device
RUNNING
: The device is active.
FALLBACK
: The device is into fallback state.
5)
access_direction
Direction where a device is installed in.
front access
: The device should be installed forward.
rear access
: The device should be installed backward.
6)
power_redundancy
State of the redundant power unit.
single
: The device has no redundant power unit.
redundant
: The device has a redundant power unit.
7)
PSU1 state
State of the power unit (PSU1).
PSU2 state
Type of the power unit (PSU2).
NORMAL
: The power unit works normally.
NO_PRESENT : The power unit is not installed.
NO_POWER
: The power unit has been turned off.
FAIL
: The power unit has been abnormal.
UNKNOWN
: The power unit is invalid type.
WARNING
: The power unit has been incorrectly mounted.
# show system status
Current-time
: Thu Dec 21 16:04:50 2008
---(1)
Startup-time
: Thu Dec 21 16:04:36 2008
---(2)
restart_cause
: power on
---(3)
machine_state
: RUNNING
---(4)
access_direction
: front access
---(5)
power_redundancy
: redundant
---(6)
PSU1 state
: NORMAL
---(7)
PSU2 state
: NORMAL
PSU1 type
: AC
---(8)
PSU2 type
: AC
power_consumption
: 75 W
---(9)
FAN1 state
: NORMAL
---(10)
FAN2 state
: NORMAL
inspiration_state
: NORMAL
inspiration_temp
: NORMA
---(11)
warning time
: Fri Dec 26 14:00:45 2008
---(12)
recover time
: Fri Dec 26 14:12:30 2008
internal_state
: NORMAL
inspiration_temp
: 35 C
---(13)
internal_temp
: 32 C