XG Series User's Guide
Chapter 5 Command Reference
LLDP Information Settings
231
5.9.1.2
lldp send hold
Function
Set LLDP hold times
Available Model
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax
lldp send hold <count>
Options
<count>
•
LLDP hold times
Specify LLDP hold time which neighbor device holds LLDP information of this device.
Specify LLDP hold times with a decimal value from 2 times to 10 times.
This setting corresponds to msgTxInterval in 802.1AB
This setting corresponds to msgTxHold in 802.1AB
Use Mode
Configuration mode (admin class)
Explanation
Specify LLDP hold time which neighbor device holds LLDP information of this device.
Default
It is assumed that 4 is set for LLDP hold times.
5.9.1.3
lldp reinit delay
Function
Set LLDP reinit delay time
Available Model
XG0224 / XG0448 / XG0440DC / XG0440DCR / XG2600
Syntax
lldp reinit delay <delay>
Options
<delay>
•
LLDP reinit delay time
When LLDP send function is disabled, this device sends LLDP information with TTL=0
and after <delay> time, this device reinitializes the internal status.
This setting corresponds to reinitDelay in 802.1AB
Use Mode
Configuration mode (admin class)
Explanation
When LLDP send function is disabled, this device sends LLDP information with TTL=0
and after <delay> time, this device reinitializes the internal status.
Default
It is assumed that 2sec is set for LLDP reinit delay time.
lldp send hold 4
lldp reinit delay 2s
