XG0440DC/XG0440DCR Hardware Guide
15
Notes on Use
Before using this device, please read the following.
•
It is strongly recommended that customers store and maintain configuration information for the device after
configuration is complete.
The configuration information can be used by a Fujitsu or Fujitsu's certified support engineer to restore configurations
if a failure occurs.
Unless the configuration information is available, it may cause difficulties and delays for the support engineer in
restoring the device to service, Please backup and maintain the configuration information so it is always up to date.
•
This device contains a protection circuit against lightning and electrostatic discharge. Therefore, some of the functions
may not work when lightning or static electricity enters the device.
In such case, the device can be restored to its normal condition by power cycling the device. If the functions are still
not available after power-on, or if the power itself cannot be turned on, the device may have been destroyed due to
lightning or electrostatic discharge beyond the threshold of the protection circuit. In this case, contact Fujitsu or
Fujitsu's certified support engineer for further instruction.
•
Do not turn the power off or reset the system during a firmware update, or the device cannot be enabled.
•
A User's Guide for this product is provided on the included CD-ROM in PDF format. A PDF viewer is required to
access this manual.
